Mesh Width 1200mm Automatic Falling Mesh Construction Mesh Panel Production Line
Construction Mesh Panel Production Line Introduction:
1. The construction mesh panel production line is one complete production line to make building mesh. The construction mesh panel production line is equipped with automatic cutting mesh machine. The cutting mesh length can be adjustable according to your requirement.
2. This construction mesh panel production line adopts electrical & electronic synchronous control technique, both separate-phases welding and welding time composed of digital and integrated electric circuit, more intelligent and rational, press at one time, separate welding.
3. The line wire is fed from coil wires,the cross wire is pre-cut. which is fed from hopper driven by stepping motor. The line wire through the line wire straighten device. make the galvanized wire or steel wire straighten. Then the line wire is feed under the welding electrodes. To start welding.
4. The welding speed is fast. The max.welding speed up to 85 times per min. Very high production speed.
5. The cutting mesh panel machine is controlled by the control cabinet. You set the cut mesh length by touch screen in the control cabinet. The cutting mesh machine will cut the mesh panel as per your required cutting mesh length. After cutting mesh panel. The mesh panel will fall into the collect mesh car. The worker pull out the collect mesh car when the mesh panel is full.
6. The pulling mesh system is controlled by the servo motor. The pulling mesh system is also controlled by air cylinder. Make sure the accurate of pull mesh size.
7. Suitable material for the construction mesh panel production line: galvanized wire,iron wire.steel wire.
8. The construction mesh panel production line need electrical transformer at least 120KVA to supply working.
Construction Mesh Panel Production Line Technical Parameters:
| No. | Item | Specification |
| 1 | Welding Wire Diameter | Φ2.5-6.0 (mm) |
| 2 | Cross Wire Space | 50-250mm (adjustable by touch screen) |
| 3 | Line Wire Space | 50-250mm (adjustable by manual measure) |
| 4 | Mesh Width | Max.1200mm customized |
| 5 | Finished Products | construction mesh panel |
| 6 | Number of Electrodes | 24pcs |
| 7 | Welding Speed | 75-85times/min |
| 8 | Rated Voltage | 220V,380V,415V,440V 50HZ or customized |
| 9 | Rated Power | 160KWA*3(Water cooling system) |
| 10 | Main Motor | 4.0 KW (Electromagnetic Brake Motor) |
| 11 | Welding Time | 10ms-100ms |
| 12 | Welding Way | By Control Silicon Electric Resistance Weld |
| 13 | Pressure Mode | Adjust Spring Pressure |
| 14 | Weight | About 3.5 T |
| 15 | Overall Dimension | 6500*1900*1700m |
Composition of Construction Mesh Panel Production Line:
| No. | Name of each part | Quantity/Set |
| 1 | Main Mesh Welding Machine | 1 |
| 2 | Cross Wire Automatic Falling Hopper | 1 |
| 3 | Servo Motor Pulling Mesh Device | 1 |
| 4 | Operation Control Cabinet | 1 |
| 5 | Wire Straightening and Cutting Machine | 2 |
| 6 | Level Spare Parts Box | 1 |
| 7 | Water Circle Pump | 1 |
| 8 | Repairing Mesh Machine | 1 |
| 9 | Cooling Water System | 1 |
| 10 | Installing Tool | 1 |
| 11 | Equipment Operation and Maintenance Manual | 1 |
Construction Mesh Panel Production Line Applications:
The construction mesh panel for municipal construction: viaduct facade pavement, square concrete overhead, concrete pipe, fence, slope protection. Water conservancy and power coal: water conservancy equipment, dam foundation, protective net, etc.
The construction mesh is used in other fields: flood control equipment, slope reinforcement, anti - collapse protection, feeding, animal husbandry.
Construction Mesh Panel Production Line Packing:
Construction Mesh Panel Production Line Photos:
Product Tags:
|
|
PLC Automatic Falling 1200mm Steel Bar Mesh Welding Machine Images
|
